| WATERBORNE LACQUER & STAIN RETARDER | ||||||||||||||||||
|
An effective Lacquer and Stain retarder for Waterborne lacquers and stains. Can provide upto 15 minutes open time for stains, and 7 minutes for lacquers. Only requires a maximum of 5% retarder to achieve maximum open time. Additional retarder will only be wasted with no further benefit. Retard stains to permit easier elimination of lap lines. Retard lacquers to eliminate overspray fuzz when shooting very large pieces or inside corners of cabinets. This is especially appropriate in hot |
||||||||||||||||||
![]() |
||||||||||||||||||
|
||||||||||||||||||
| CLEAR ACRYLIC STAIN BASES | ||||||||||||||||||
|
Choose between the Thick (Heavy) stain base, or the Thin (Lite) stain base to create your own Waterborne Acrylic stain colors. |
||||||||||||||||||
![]() |
||||||||||||||||||
|
||||||||||||||||||
|
TABLE OF CONTENTS |HOME | AQUADURA | AQUAPRO | AQUA-METALICA I | AQUAPRIMA |LACQUERS
|PROLINE| PUTTY/BUFFING
| Contact
|
SDA / CRAFT TECHNOLOGIES
3308 INDUSTRY DR SIGNAL HILL CA 90755 800-949-0275 / 562-597-0024 / 562-597-1244 FAX |
||||||||||||||||||