WATERBORNE LACQUERS
WATERBORNE LACQUER THINNER & FISH EYE REMOVER

A full strength Lacquer Thinner and fish-eye remover for use in waterborne lacquers. This product uses the same unique blend of coalescing solvents as used in SDA lacquers to maintain the integrity of the film forming characteristics while permitting a thinner film. Open time is extended but dry-to-sand time remains unchanged.Use up to 5% by volume although less is usually ample.

LT-210 WATERBORNE LACQUER THINNER
 

CLEAR ACRYLIC STAIN BASE

Choose between the Thick (Heavy) stain base or the Thin (Lite) stain base to create your own Waterborne Acrylic stain colors.

Clear Acrylic Stain Base

SS-1072 Lite Clear Stain Base
ST-1072 Heavy Clear Stain Base

 
WATERBORNE LACQUER RETARDER

An effective lacquer and stain retarder for Waterborne lacquers and stains provide up to 20 minutes open time for stains, and 5 minutes for lacquers. Only requires a maximum of 5% Retarder to achieve maximum open time.

Additional retarder will only be wasted with no further benefit. Retard stains to permit easier elimination of lap lines. Retard lacquers to eliminate overspray fuzz when shooting very large pieces or inside corners of cabinets.
LR-200 WATERBORNE LACQUER & STAIN REMOVER

TABLE OF CONTENTS |HOME | AQUADURA | AQUAPRO | AQUA-METALICA I | AQUAPRIMA

|LACQUERS |PROLINE| PUTTY/BUFFING | Contact |
copyright © 2000 SDA / Craft Technologies All rights reserved.

 

 
  	SDA  / CRAFT TECHNOLOGIES
	3308 INDUSTRY DR 
		LONG BEACH CA 90806
 800-949-0275 / 562-597-0024  / 562-597-1244