SQUEEKY CLEANER WATERBORNE EQUIPMENT
CLEANING SOLVENT
Water works effectively most of the time to clean up.But when the lacquer has dried, regular solvents like lacquer thinner or acetone just make the dried waterborne gummy. Use this waterborne solvent blend for effective cleaning. dilute with water up to a 2:5:1 ratio of water to cleaner.

SQ-100 GUN CLEANER CONCENTRATE

 
BUFFING & POLISHING COMPOUNDS


All of SDA’s waterborne lacquers may be buffed to a mirror finish. If you are
not familiar with buffing waterborne lacquers, please obtain instructions on
"how to" before using . These compounds made by TR industries, are designed for
hard Waterborne finishes. Buffing compound is a narrow spectrum 2K grit, and
the finishing compound is a very fine scratch and swirl fill polish..

BUFFING COMPOUNDS
CTR-311 2000 GRIT BUFFING COMPOUND
TR-308 FINE FINISH POLISH COMPOUND

TABLE OF CONTENTS |HOME| AQUAFLOW | AQUADURA | AQUAPRO | AQUA-METALICA I | AQUAPRIMA

|LACQUERS |PROLINE| PUTTY/BUFFING | Contact |
copyright © 2000 SDA / Craft Technologies All rights reserved.

 

SDA / CRAFT TECHNOLOGIES
3308 INDUSTRY DR
SIGNAL HILL CA 90755
800-949-0275 / 562-597-0024 / 562-597-1244 FAX