AQUA TERRATM PREMIUM WATERBORNE LACQUER FOR WOOD |
|||||||||||||||
![]() |
|||||||||||||||
AQUA TERRA (SLOW COAT)TM is our Premium Single Component brushable Waterborne lacquer technology, used by some of the finest hi-end furniture manufacturers in the country. The basis of the SLOW-COAT technology is a unique Acrylized UrethaneTM dispersion that provides maximum hardness, superior flowout and build, with a com- pletely water clear non-yellowing finish. An additiional Polyethylene resin gives it a rich, warm, waxed feel, almost as though the finished product was pre-waxed. This lacquer cures to a hard, durable finish in a comparatively short time. It performs wonderfully in high volume heat tunnel applications. It may be used with a crosslinker (catalyst) for extra chemical resistance. Therefore it is excellent as a floor coating. Aqua Terra (Slow-Coat) dries slower than our regular lacquers, so that it has time to properly flow and level. As a floor coating it is trowelable, rollable, brushable or sprayable. It compares favorably to the leading European Waterborne floor coating, and other competitors, in that it outperforms all others in wear, scuff and abrasion tests. AVAILABLE IN THE FOLLOWING SHEENS 90 Sheen Gloss 60 Sheen Semi-Gloss 30 Sheen Satin 15 Sheen Flat |
|||||||||||||||
Gloss 90 Relative Hardness: 105 Konig Coating VOC lbs/gal (less water) 1.72 Material VOC lbs/gal (with water) 0.68 Viscosity 50 Seconds #2 Zahn Coverage 400 sq.ft. per gallon |
|||||||||||||||
Tack Free Time 12 minutes@ 75f Dry to Sand 28 minutes@ 75f KCMA Tests Passes all Total Solids Volume 30.38% Weight Volume 8.77 lbs/ gal |
|||||||||||||||
TABLE OF CONTENTS |HOME| | AQUADURA | AQUAPRO | AQUA-METALICA I | AQUAPRIMA |LACQUERS
|PROLINE| PUTTY/BUFFING
| Contact
|
SDA / CRAFT TECHNOLOGIES
3308 INDUSTRY DR SIGNAL HILL CA 90755 800-949-0275 / 562-597-0024 / 562-597-1244 FAX |
|||||||||||||||